Whirlpool Appliance Error Codes
Complete reference guide with 43+ error codes for Whirlpool appliances, including Maytag, KitchenAid, Amana, Jenn-Air. Find your error code below, understand the cause, and learn if it's a DIY fix or needs professional repair.
Parent company: Whirlpool Corporation | Also covers: Maytag, KitchenAid, Amana, Jenn-Air
| Code | Description | Severity |
|---|---|---|
| F0E1 Also: rL | Load in tub during clean cycle Causes: Items left in drum | low |
| F0E2 | Overload detected Causes: Too many items | low |
| F0E5 | Load imbalance Causes: Uneven load | low |
| F1E1 | Motor control error Causes: Motor control board failure | high |
| F1E2 | Motor error Causes: Motor failure, Wiring issue | high |
| F2E1 | Stuck key / user interface Causes: Stuck button, Interface board issue | medium |
| F3E1 | Pressure switch / water level Causes: Pressure switch failure, Hose disconnected | high |
| F5E1 | Door switch error Causes: Door switch failure | medium |
| F5E2 | Door lock error Causes: Lock mechanism failure | medium |
| F5E3 | Lid lock error Causes: Lid lock mechanism failure, Wiring issue | medium |
| F7E1 | Motor speed sensor Causes: Speed sensor failure, Motor issue | high |
| F8E1 Also: LF | Long fill / water supply Causes: Water supply off, Clogged inlet screens | medium |
| F8E3 | Overflow Causes: Inlet valve stuck, Pressure switch failure | high |
| F9E1 Also: Ld | Long drain Causes: Clogged filter, Kinked drain hose | medium |
| Sud Also: Sd | Excessive suds Causes: Too much detergent | low |
| HC | Hot/cold hoses reversed Causes: Hoses connected to wrong inlets | low |
When to Call a Professional
- Error code returns after power reset
- Code is marked as high severity
- Appliance is leaking water, making unusual noises, or smells like burning
- You're not comfortable working with electrical or gas appliances
Whirlpool Error Codes — FAQ
What are the most common Whirlpool error codes?
The most common Whirlpool error codes relate to temperature sensors, drainage issues, motor errors, and communication failures. Check our complete list above for your specific code, or call Arcane for professional diagnosis.
How do I reset my Whirlpool appliance after an error code?
For most Whirlpool appliances, unplug the unit or turn off the circuit breaker for 60 seconds, then restore power. If the error code returns after reset, the underlying issue needs professional repair.
Can I fix a Whirlpool error code myself?
Some Whirlpool error codes indicate simple issues like unbalanced loads, clogged filters, or suds buildup that you can fix yourself. Our table above marks each code as DIY-fixable or requiring professional service. For high-severity codes, always call a certified technician.
How much does Whirlpool appliance repair cost in San Francisco?
Whirlpool appliance repair in the Bay Area typically costs $100-$500 depending on the issue. Simple fixes run $100-$200, while complex repairs (compressor, control board) can be $300-$600. At Arcane, diagnosis is free when you proceed with the repair.
Does Whirlpool warranty cover error code repairs?
Whirlpool manufacturer warranty typically covers defects for 1-2 years from purchase. Some components (like LG linear compressors) have extended coverage. Our technicians can verify your warranty status and handle claims. Even out-of-warranty repairs are affordable with Arcane.
Do Maytag and KitchenAid and Amana and Jenn-Air use the same error codes as Whirlpool?
Maytag, KitchenAid, Amana, Jenn-Air are part of the Whirlpool family and often share similar platforms and error code systems. However, some models may have unique codes. Our reference covers error codes for all brands in this family.